Connect DVD Player to Smart TV for DVD Movies

Date March 19, 2018 Author Catherine Category TV

DVDs are the main entertainment way today, we can buy the DVD player from the market or Amazon easily with the resonable price. Next we will meet the trouble: How to hook up a DVD player to your TV will give you access to countless hours of movie-watching bliss. For example: One user ays that his dvd player has red white and yellow wires that connect from dvd to tv. He has a smart TV and connecting this wires do not work. How to connect the DVD player to smart TV rightly?

In fact, there are many ways to connect the DVD player to TV, you can connect the DVD player to TV with the HDMI cable, you also can connect the DVD player to TV with A/V cable, or you can choose other Component Cables. We will take the HDMI and A/V cable for example and show you how to connect the DVD player to smart TV easily.

Solution 1: Connect DVD player to smart TV with HDMI cable

Step 1. Plug the first end of the cable into the HDMI socket on the DVD player.

Look for the "HDMI" or "HDMI Out" label and fit the cable securely into the socket. This is the highest quality connection for audio and video and is typically found only on modern DVD players.

Step 2. Plug the second end of the cable into the HDMI socket on the TV.

Just like DVD players, only newer TV’s have HDMI sockets. There may be multiple sockets available. Each HDMI socket will be labeled "HDMI" or "HDMI In" along with a potential input number. If there is an input number, like "HDMI 1," remember it for later. This is the setting your TV must be set at to see your movies.

Step 3. Make sure that both HDMI connections are secure.

An HDMI connection only requires one cable that carries both audio and video signal, and it does not matter which end goes where. But if the cable is pulled too tightly, or one of the connections is loose, you may not get a good signal. There are a lot of different HDMI cords available, but unless you want pristine, perfect picture then any length and type of cord will work just fine as long as it reaches.

Step 4. Power on the DVD player and TV.

Insert a DVD so that you can test both the picture and the audio.

Step 5. Switch the TV to the correct input using the "source" button on your TV or Remote.

Sometimes labeled "input," this button allows you to switch where your TV gets the video and sound information. The input you choose on the TV should match the input you used for the cables. If there is not a label or you don’t know what input to use, leave the DVD player on and test each input for 5-10 seconds to see where the video appears.

Solution 2: Connect DVD player to smart TV with A/V Cables (3-Prong)

Step 1. Plug in one end of the A/V Cables to the Output sockets on the DVD player. 

The sockets are color-coded to match the cable (Red, White, and Yellow). Look for the “Output” or “Out” group. The Red and White sockets (Audio) may be separated from the Yellow one (Video)

Step 2. Plug in the other end to the matching input sockets on the TV. 

Like on the DVD player, these will be color-coded to match the cable and grouped into input groups. Look for the “Input” or “In” designation. A/V inputs are typically numbered to indicate which input you will need to select on the TV.

Step 3. Make sure your connections are snug and matched to the right color. 

Match the colored plugs on the cable to the colored sockets on both the DVD player and TV.

Step 4. Power on the DVD player and TV. 

Insert a DVD so that you can test both the picture and the audio.

Step 5. Switch the TV to the correct input using the “source” button on your TV or Remote. 

Sometimes labeled “input,” this button allows you to switch where your TV gets the video and sound information. The input you choose on the TV should match the input you used for the cables.

Benefit: Can’t Pay the DVD/Blu-ray disc

You must have masted this skill, some users meet other troubles: Can’t play some DVDs on the DVD player due to the DVD region code, other copy protection, etc. Do you want to replace another DVD player? I have to say it’s expensive. Why not try the professional DVD ripper, like the Pavtube Video Converter Ultimate, professional DVD ripper which can remove the DVD copy protection: Copy/Rip Lionsgate DVD, DVD region code, DVD CSS, DVD UOPs, etc.

You not only can remove the DVD copy protection, you also can rip DVD/Blu-ray to digital format which you can keep the DVD and Blu-ray discs. There are 300+ video formats for you: MP4, MKV, AVI, H.264, H.265, FLV, VOB, etc. Best of all, you even can get the 3D video formats from the common 2D videos, DVDs, Blu-ray disc. You can enjoy the videos on various VR headset: Samsung Gear VR, PS VR, Oculus Rift DK2, Google Cardboard, etc.

Quick Guide: Get Digital DVD videos

Step 1. Install and launch the program, then click "File" button to import the DVD/Blu-ray movies that you want to convert.

Step 2. Click the Format button and choose the video format you want to play, you can get the HD videos, common videos, 3D videos, you also can choose the device preset.

Step 3. Press the Convert button to start the video conversion.